FABRIX · Tender cost estimate
[DEMO] Horizontal 3-Phase Separator V-101
Fictional Petroleum Co. · Ref FX-TDR-2611-001 · Pressure Vessel
Bid due 2026-11-25
Approval: In Review
Generated 2026-11-20
FICTIONAL SAMPLE — demonstration data only; rates are not real company values.
DRAFT / INCOMPLETE — NOT FOR CUSTOMER ISSUE
Selling price
AED 360,780
Total cost
AED 306,663
Steel
21.57 t
Man-hours
641
Cost summary by work package
| Steel Materials | AED 118,215 |
| Purchased Items | AED 5,805 |
| Fabrication | AED 61,618 |
| Inspection & Coating | AED 68,138 |
| Direct cost | AED 253,776 |
| Overhead (14%) | AED 35,529 |
| Contingency (6%) | AED 17,358 |
| Margin (15% on price) | AED 54,117 |
| Selling price | AED 360,780 |
Cost breakdown
| Category | Line | Source | Hours | Amount |
|---|---|---|---|---|
| Material | SA-516 Gr70 plates (2 marks) | calculated | AED 107,627 | |
| Material | S355J2 plates (3 marks) | calculated | AED 9,369 | |
| Material | A106 Gr.B pipes (2 marks) | calculated | AED 1,219 | |
| Purchased | Nozzle stud bolts, nuts and spiral-wound gaskets | manual | AED 2,035 | |
| Purchased | Filler metal and SAW flux | assumed | AED 3,770 | |
| Cutting | Plate profiling (CNC) | calculated | 14.4 | AED 2,237 |
| Rolling | Shell course rolling | manual | 56.0 | AED 11,872 |
| Fit-up | Shell & head fit-up | manual | 108.0 | AED 8,736 |
| Machining | Flange facing | manual | 27.5 | AED 6,160 |
| Assembly | Internals installation | assumed | 120.0 | AED 7,440 |
| Handling | Rigging & movements | assumed | 80.0 | AED 6,440 |
| Welding | Longitudinal seams · Fillet (SAW) | model | 35.1 | AED 4,564 |
| Welding | Circumferential seams · Fillet (SAW) | model | 41.3 | AED 5,377 |
| Welding | Head-to-shell · Fillet (SAW) | model | 19.4 | AED 2,527 |
| Welding | Nozzle set-on welds · Fillet (GTAW) | manual | 61.1 | AED 4,901 |
| Welding | Saddle attachments · Fillet (FCAW) | assumed | 13.9 | AED 1,364 |
| Blasting | Abrasive blast Sa 2½ | calculated | 16.3 | AED 4,470 |
| Coating | Standard paint system | calculated | 24.4 | AED 7,721 |
| NDT | NDT 100% of weld length | calculated | AED 7,744 | |
| PWHT | Post-weld heat treatment | calculated | AED 30,203 | |
| Testing | Hydrotest / pressure test (lump sum) | assumed | 24.0 | AED 18,000 |
Bill of materials
| Assembly | Mark | Profile | Grade | Qty | kg | Source |
|---|---|---|---|---|---|---|
| Shell | SH-01 | PL 32 | SA-516 Gr70 | 4 | 15,273.0 | model |
| Heads | HD-01 | PL 34 | SA-516 Gr70 | 2 | 3,891.4 | model |
| Saddles | SD-01 | PL 20 | S355J2 | 4 | 653.1 | model |
| Saddles | SD-02 | PL 16 | S355J2 | 12 | 271.3 | manual |
| Nozzles | N-01 | 12in SCH80 | A106 Gr.B | 3 | 131.5 | model |
| Nozzles | N-02 | 4in SCH80 | A106 Gr.B | 8 | 53.5 | manual |
| Internals | IN-01 | PL 10 | S355J2 | 6 | 1,300.0 | unknown |
Purchased items
| Item | Specification | Qty | Unit | Rate AED | Amount | Basis |
|---|---|---|---|---|---|---|
| Nozzle stud bolts, nuts and spiral-wound gaskets | ASME B16.5 / ASTM A193 B7 with A194 2H | 11 | set | 185.00 | 2,035.00 | Manual unit rate recorded (no supplier quotation selected) |
| Filler metal and SAW flux | AWS A5.18 ER70S-6 / AWS A5.17 F7A2 | 260 | kg | 14.50 | 3,770.00 | Manual unit rate recorded (no supplier quotation selected) |
| Anchor chair grout and shim packsexcluded | MasterFlow 648 or equivalent | 1 | lot | — | — | No rate recorded — the item blocks approval |
Commercial exclusions
- Anchor chair grout and shim packs is excluded from this price: Supplied by the civil works contractor under the site scope split (RFQ section 4.2).
Every exclusion carries the reason recorded against the item. An exclusion without a written justification blocks approval.
Welding basis
| Ref | Joint preparation | L m | A mm² | Metal kg | Consumable kg | Hours | Source |
|---|---|---|---|---|---|---|---|
| Shell — Longitudinal seams | Fillet weld (throat sized) | 32.000 | 576.00 | 144.6912 | 152.3065 | 35.08 | model |
| Shell — Circumferential seams | Fillet weld (throat sized) | 37.700 | 576.00 | 170.4643 | 179.4361 | 41.32 | model |
| Heads — Head-to-shell | Fillet weld (throat sized) | 15.100 | 676.00 | 80.1297 | 84.3470 | 19.43 | model |
| Nozzles — Nozzle set-on welds | Fillet weld (throat sized) | 14.000 | 100.00 | 10.9900 | 11.5684 | 61.06 | manual |
| Saddles — Saddle attachments | Fillet weld (throat sized) | 42.000 | 64.00 | 21.1008 | 23.4453 | 13.88 | assumed |
Sections are calculated from recorded joint preparation. A groove weld whose dimensions are missing is reported as insufficient data and blocks approval; it is never priced as a fillet. Consumable mass is divided by the configured process efficiency; its price is only included when a filler-metal rate is recorded in the library.
Assumptions
- Saddle weld lengths assumed from typical detail (not modelled)
- Internals scope from P&ID only — data source unknown
- Hydrotest lump sum per historic fictional average
Missing data & flags
- [warning] Part IN-01: data source unknown — verify
- [warning] 42 m of weld is assumed (not measured)
- [warning] Purchased item "Filler metal and SAW flux": quantity is assumed, not measured